AWWA Class E-Ring and Blind Flanges

AWWA Class E-Ring and Blind Flanges
AWWA Class E-Ring and Blind Flanges AWWA Class E-Ring and Blind Flanges

Note:

  1. Ring flanges available overbored or counterbored per customer specification.
  2. Bolt holes shall be drilled 1/8th inch larger in diameter than the nominal diameter of the bolt, except for flanges larger than 84 inch in diameter which shall be drilled 3/16th inch larger than the nominal diameter of the bolt.
  3. Drilling same as ANSI/ASME B16.1 125 lb and B16.5 150 lb pattern.
  4. Flanges available overdrilled to accommodate insulators.
  5. AWWA recommends the use of dished head assemblies as alternate to blind flanges, sizes over 72" nominal.
  6. AWWA C207-01 Class B and D Hub Flanges are identical to Industry Standard Class 125 Light Weight Flanges.


AWWA Flange Charts and Drawings

These tolerances are a part of ANSI B16.5 and AWWA C207-01 Sec. 4.2 except where noted otherwise.
AWWA Ring Flanges

Requirements are valid for normal case, in special case you have to contact the technical department.

Slip-On Flanges, SO Flange
Common flange types
Specialty flange
Specialty flange
150LB Carbon steel forged flange
Material Grades

Flanges specification, Standard and identification

Below you will find a short description and definition of each type, completed with an detailed image.

 



SUNNY STEEL

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763