15CrMoG

15CrMoG Alloy steel pipe is a seamless steel tube, its performance is much higher than the general seamless steel pipe, because the inside of this tube contains CR more, its alloy steel tube high temperature, low-temperature, corrosion resistance of other seamless steel tubes, so the alloy tube in the petroleum, chemical, electric power, boiler and other industries are more widely used.

The range of 15CrMoG pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.

15CrMoG steel under GB 5310 standard is seamless steel pipe and tube for high pressure boilers, steam boilers, and pipe lines.
15CrMoG seamless tubes for high pressure boiler

For high-pressure boiler (working pressure 9.8MPa or more generally, the working temperature between 450℃-650℃) of heating surface tubes, header, economizer, superheater, reheater and so on.

15CrMoG Seamless Tubes for High Pressure Boiler description

Standard: GB 5310

Relative grades:

  • 20G, 20MnG, 15MoG, 15CrMoG, 12Cr2MoG, 12Cr1MoVG. After consultation, can also supply other grades of steel.

15CrMoG Alloy steel pipe is a seamless steel tube, its performance is much higher than the general seamless steel pipe, because the inside of this tube contains CR more, its alloy steel tube high temperature, low-temperature, corrosion resistance of other seamless steel tubes, so the alloy tube in the petroleum, chemical, electric power, boiler and other industries are more widely used.

Mechanical properties:

Chemical composition:

15CrMoG seamless tubes heat treatment: Normalizing and tempering

  • Normalizing temperature: 900 °C-960 °C
  • Tempering temperature: 680 °C-730 °C

The W.T. tolerance of 15CrMoG:

The principle of purifying hydrogen from 15CrMoG alloy steel tube is that, at 300-500 ℃, hydrogen is adsorbed on the side of the 15CrMoG alloy steel tube, and the hydrogen is absorbed on the 1515CrMoG alloy steel pipe wall, because of the lack of two electrons in the 4d electron layer of palladium, It can produce unstable chemical bonds with hydrogen (this reaction of palladium and hydrogen is reversible), under the action of Palladium, hydrogen is ionized to proton its radius is 1.5x1015m, and the lattice constant of palladium is 3.88×10-10m (20 ℃), so it can pass 15CrMoG alloy steel pipe, Under the action of Palladium, protons are combined with electrons to form hydrogen molecules, escaping from the other side of the 15CrMoG alloy steel tube.

Related products
GB9948 standard
The range of AS
ASTM A335 Pipe
ASTM A333 Grade
ASTM A335 P11 i
Sunny Steel can
ASTM A335 P9 Al
20G
20G is the stee

发表评论

电子邮件地址不会被公开。 必填项已用*标注

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据