Main location

Shanghai, China

Send email to us by

sales@sunnysteel.com

Know-how and best quality

tel:+8621 3378 0199

ASTM A333 Grade 6, Seamless Steel Pipe for Low-Temperature Service

A333-6 steel is a low-temperature steel of the minimum temperature of 70 ° C. Usually normalized or normalized and tempered state supplier. A333-6 steel carbon content is lower, so hardened the tendency and cold cracking tendency are relatively small. Material toughness and ductility is better, generally difficult to produce hardening and cracks, good weldability, optional W707Ni electrode with El the imports of wire TGS 1N, using argon ITU welding. To ensure good toughness of welded joints.

A333-6 Chemical composition

 C  Mn  Si  S  P
 ≤0.120  0.290-1.060  ≥0.100  ≤0.058  ≤0.048

A333-6 Mechanical property

 tensile strength(Mpa)   yield strength(Mpa)  elongation(%)
 414  241  ≥16.5

Preheat

When the ambient temperature is below 5 ° C required weldment preheating. Preheat temperature of 100-150 oC: Preheat the scope of welds on each side of 100 mm; heating oxyacetylene flame (neutral flame) temperature measuring pen measuring the temperature at 50 ~ 100 mm from the center of the weld. The measurement points uniformly distributed, in order to better control the temperature.

sunnysteel

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.

发表评论

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据

%d 博主赞过: