JIS G 3115 Steel Plates For Pressure Vessels For Intermediate Temperature Service[……]
4 12月, 2019
JIS G 3115 Steel Plates For Pressure Vessels For Intermediate Temperature Service[……]
SPV315 is a steel material with a lower limit of yield point (yield strength) of 315 MPa, and is a Si-Mn steel plate material.[……]
SPV355 is one of the material symbols stipulated in JIS standards as a steel material for pressure vessels.[……]
SPV410 is one of the steel materials designed for pressure vessels, and the numbers are given because the lowest yield point or proof stress is set to 410 MPa.[……]
SPV450 is a kind of silicon manganese steel and is used for pressure vessels.[……]
JIS G3115 SPV490 Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.[……]
SPV235 is one of the JIS standard material symbols specified for steel plates for pressure vessels, and the number 235 indicates the lowest yield point at room temperature.[……]
With alloy Chrome and Molybadenum elements,boiler steel plate 13CrMo44 owned the minimum yield strength at 300 Mpa,and tensile strength within 440-590Mpa.[……]
ASTM A515 Grade 60 boiler steel plate under A515/A515M steel standard specification for pressure vessel steel plate,carbon steel for intermediate and higher temperature service.[……]
ASTM A516 Grade 65 boiler steel plate owned a higher yield strength and tensile strength comparing with boiler steel plate A516 Grade 55 and A516 Grade 60.[……]
ASTM A516 Grade 60 boiler steel plate is normally used for building pressure vessels in pressure vessel manufacturers’s plants.[……]
Maximum plate thickness is only limited by the capacity of the composition to meet the specified mechanical property requirements; however, current production of ASTM A516 Grade 55 plates are normally limited to maximum thickness of 12 in. (305 mm).[……]