Corten Steel Plate

Corten steel is a weather resistant steel that is often used in applications that are exposed to atmospheric elements as it is highly corrosion resistant. This type of steel is unique as it forms a thick layer of ‘rust’ when it comes into contact with the pollutants in the air, and this ‘rust’ provides a protective layer that prevents any further corrosion.

Often known as a ‘self-protecting’ steel, corten steel is a copper, chromium, and nickel alloy that has a distinct ‘rusty-red’ coloring that is considered aesthetically pleasing to many.

Corten Steel is often employed in structural applications, including bridges due to the low cost of maintenance. The appearance of the steel has also resulted in its adoption in many aspects of modern architecture.

The natural finish of Corten steel usually ensures that no maintenance such as painting is required. Making the material a cost effective solution over other structural steels. The only potential scenario where maintenance would be required more often is if the structure is continuously subjected to water as the protective layer won’t form.

Technical Requirements:

  • The chemical element Cr of Ladle analysis in Corten A shall be within 0.50-1.25 %
  • The chemical element Cr of Ladle analysis in Corten B shall be within 0.40-0.65 %
  • The chemical element P of Ladle analysis in Corten B shall be belows 0.03 %
  • Low temperature impacting test

Additional Services:

  • Product Analysis
  • Drop-Weight test
  • Simulated post-welded heat treatment (PWHT)
  • Cutting and welding as per end user’s demands
  • Third-Party Inspection arrange
  • Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2

All Steel Grades Chart for Corten Steel Plate: 

STANDARD STEEL GRADE
EN10025-5 S235J0W,S235J2W,S355J0WP,S355J2WP,S355J0W,S355J2W, S355K2W
JIS G3114 SMA400AW,SMA400BW,SMA400CW,SMA400AP,SMA400BP, SMA400CP,SMA490AW,SMA490BW,SMA490CW,SMA490AP, SMA490BP,SMA490CP,SMA570W,SMA570P
COR-TEN Cor-ten A,Cor-ten B
GB/T4171 09CuPCrNi-A,09CuPCrNi-B,09CuP Q235NH,Q295NH,Q355NH,Q415NH,Q460NH,Q500NH,Q550NH Q295GNH,Q355GNH,Q265GNH,Q310GNH
ASTM A242/242M A242
ASTM A588/A588M ASME SA588/SA588M A588 Grade A,A588 Grade B,A588 Grade C,A588 Grade K SA588 Grade A,SA588 Grade B,SA588 Grade C,SA588 Grade K

 

Corten A

In addition to the standard elements of copper, chromium, and nickel, Corten A has added phosphorus. The addition of phosphorus makes this grade of Corten steel suitable for gas flue applications and aesthetic facias.

The minimum yield strength of Corten A is 345 N/mmand the minimum tensile strength is 485 N/mm2. We supply them in strips with thicknesses ranging from 2 mm – 12 mm.

Corten B

Corten B is relatively similar to Corten A, although it does have a lower level of phosphorus. Corten B is also better suited for heavy and load bearing structures.

Corten B has a minimum tensile strength of 485 N/mm2 and a minimum yield strength of 345 N/mm2. We supply Corten B in strips of 2 mm – 13 mm.

Related products
Shipbuilding st
The high tensil
Under Korean Re
The higher stee
Normalized ship
Shipyards use s
KR Grade D ship
KR Grade B stee
Steel plate KR
Comparing commo
KR Grade AH32 s
KR Grade A stee