Pipe fittings

SunnySteel is a merchant exporter and supplier of pipe fittings. Pipe fittings are widely demanded for any piping and plumbing systems used in industrial and commercial applications. Fittings allow pipes to be joined or installed in the appropriate place and terminated or closed where necessary.

Pipe fitting are work that involves the installation or repair of pipes or tubes.

The most used fittings types in Petro and chemical industry are:

Pipe elbowPipe elbow, Elobw fittings

Steel elbow is used to be installed between two lengths of pipe or tube allowing a change of direction,usually these carbon steel elbows distinguished by connection ends.

Long radius + Short radius

Pipe bendingPipe bending, Bend pipes

Pipe bend can be made of variety materials,like carbon steel,alloy steel,stainless steel,low temperature steel or high performance steel,etc.

How to bend square steel tube?

Straight tee and Reducing teePipe Tee, Tee fittings

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line.  Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.

Cross fittings

A234 WPB Large Diameter Pipe CapPipe cap, Cap fittings

A pipe cap is a kind of Pipe fitting. It usually acts as a protective device designed to protect pipe ends of various pipes. The main use of pipe caps is to waterproof the connections.

Large diameter pipe cap

Reducer is a kind of fitting that be used for reducing piping size. Concentric reducer is most commonly used and often eccentric reducer used in piping in about pump and pipe rack area.Pipe reducers

Reducer is a kind of fitting that be used for reducing piping size. Concentric reducer is most commonly used and often eccentric reducer used in piping in about pump and pipe rack area.

Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End. Stub Ends

Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End.

steel-couplings-fittingsCoupling Fittings

Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided with a swaged-on adapter carrying the necessary means to connect or disconnect the tubes without disturbing the swaged-on adapter.

Standard, Material and Grades of pipe fittings

ASME B16.9, ASME B16.28, ASME B16.25ASME B16.11, MSS-SP 97

Carbon Steel: ASTM A234 Gr. WPB,  ASTM A420 Gr. WPL6ASTM A105
ASTM A350 Gr. LF2
Stainless Steel: ASTM A403 WP316/316L/WP304/304L,  ASTM A182 F316L/304L

Material Inspection Forging & RollingFlanges Manufacturing Process

Understanding customers requirement and ensuring to supply as per these requirements is realised with the help of quality assurance at Sunny Steel…

We have the professional engineers, measurement the size of Pipe flanges.

Measure the size of a flange

At some point, with all the possibilities of thread form, diameter, and pitch, you need to send it off to SK Grimes or another machinist.

Gaskets for Flange ConnectionsGaskets for Flange Connections

Flange gaskets are used to create a static seal between two flanges faces, at various operating conditions, with varied pressure and temperature ratings.

Forged FlangeForged Flange, Forged steel flanges

Forged flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate the assembly and disassembly of a piping system.

Advantages of Expander FlangesWhat is an Expander Flange?

Expander Flange is a Welding Neck pipe flange where the nominal size of the non-flanged end is larger than the nominal size of the flanged end. They can be used to change the size of a pipe run.

Recent Posts

China Hit With Heavy Cold-Rolled Steel Duties, Korean and Russian Imports Mostly Unharmed

Today, the Commerce Department announced its affirmative preliminary determinations in the countervailing duty investigations of imports of cold-rolled steel flat products from Brazil, , India, and Russia, and its negative preliminary determination in the CVD investigation of imports of cold-rolled steel flat products from South Korea.

The investigations cover cold-rolled, flat-rolled . It should come as no surprise that the largest subsidies are being assigned to Chinese importers.

Chinese Imports Take a Hit

In the China investigation, Commerce preliminarily determined that mandatory respondents Angang Group Hong Kong Co., Ltd. and Benxi Iron and Steel (Group) Special Steel Co., Ltd. and, a non-cooperative exporter — Commerce’s term for companies that do not respond to requests for information in the investigation — Qian’an Golden Point Trading Co., Ltd., received whopping subsidy rates of 227.29%.

All other exporters of cold-rolled steel flat products from China will be subject to that same subsidy rate of 227.29%. The rates are based on adverse facts available. Commerce determined that the Government of the People’s Republic of China, and the mandatory respondents, did not fully cooperate in the investigation.

  1. China Hit With Heavy Cold-Rolled Steel Duties, Korean and Russian Imports Mostly Unharmed Leave a reply
  2. German Steel mills reduces prices in an effort to maintain output Leave a reply
  3. US Raw Steel production declines sharply by 14.4% y/y to 1,536,000 net tons Leave a reply
  4. ATI Idles GOES, Some Stainless Operations; Chinese Output Still Slowing Leave a reply
  5. Major steel scrap exporters seen shifting their focus to non-Chinese markets Leave a reply
  6. Updated list of top ferrous scrap processors in North America to be published soon Leave a reply
  7. Spot HRC prices in US Midwest market fall to near 12-year low in November Leave a reply
  8. Brazil steel sheet imports plunged 46% in November Leave a reply
  9. US Weekly Raw Steel production slumps by over 1% Leave a reply
  10. Southern European HRC Steel prices drop another €4 a ton Leave a reply
  11. Feng Hsin keeps rebar and scrap buying prices unchanged for current week Leave a reply
  12. North American Stainless Joins Base Price Increase Pack Leave a reply
  13. December Steel Price Forecast: HRC Price to Drop in 2016? Leave a reply
  14. Indian Spot HRC Steel prices decline sharply during November Leave a reply
  15. List of world top ten steel producing nations during Nov 2015 Leave a reply
  16. What is the factor to lift Indian Shredded Scrap prices? Leave a reply
  17. Global Steel prices remain under pressure in December: MEPS Leave a reply
  18. Heavy Anti-Dumping Duties Hit Chinese Anti-Corrosive Steel Imports Leave a reply
  19. Africa crude steel output in November plunged 13.5% Leave a reply
  20. US Raw Steel output declined 0.8% in the week ending Dec 19th Leave a reply
  21. Southern European HRC Steel prices slip to €277 a ton Leave a reply
  22. Turkey Found to Have Illegally Subsidized Welded Carbon Steel Pipe Imports Leave a reply
  23. North American crude steel output dips in November Leave a reply
  24. Decline in world crude steel output accelerates further in Nov 2015 Leave a reply
  25. BRIC Steel prices continue to fall in December: MEPS Leave a reply
  26. US Raw Steel production plummets by 15.2% y/y to 1,523,000 net tons Leave a reply
  27. Northern European HRC Steel prices slip Leave a reply
  28. India to soon announce Minimum Import Price for steel Leave a reply
  29. Vietnam scrap steel imports dropped 13% in November Leave a reply