JIS G3114 SMA400AW

We offer SMA400AW weather resistance steel plate,SMA400AW weather resistance steel coil.Under Japanese steel specification JIS G3114,there are hot rolled atmospheric corrosion resisting steel plate SMA400AW,weathering steel plate SMA400BW,steel plate SMA400CW and other weathering steel grades with different mechanical strength and chemicals.The letter symbol W denotes that the plates are usually used in the delivered condition or chemically treated against rusting,steel class AW,BW,CW named according to different impacting test temperature and energy.

Mechnical property for SMA400AW Corten steel:

Thickness (mm)
SMA400AW ≤ 16 > 16 ≤ 40 > 40 ≤ 75 > 75 ≤ 100 > 100 ≤ 160 > 160
Yield strength (≥Mpa) 245 235 215 215 205 195
Tensile strength (Mpa) 400-540

Chemical composition for SMA400AW Corten steel (Ladle Analysis Max%)

Main chemical elements composition of SMA400AW
C Si Mn P S Cu Cr Ni
0.18 0.15-0.65 1.25 0.035 0.035 0.30-0.50 0.45-0.75 0.05-0.30
JIS G3114 standard is based on the provisions of Article 12, Paragraph 1 applied mutatis mutandis pursuant to Article 14 of the Industrial Standardization Act.

Technical Requirements & Additional Services:

  • High tension test
  • Chemical Analysis
  • Low temperature impacting test
  • Ultrasonic test under EN 10160,ASTM A435,A577,A578
  • Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
  • Shot blasting and Painting,Cutting and welding as per end user’s demands

 

The Iron and Steel Federation (JISF) has requested that the Japanese Industrial Standards be revised with the draft of the Industrial Standards.This is a Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry after deliberation by the study group.As a result, JIS G 3114 : 2008 was revised and replaced with this standard.

Related products
JIS G3115 SPV49
SPV450 is a kin
SPV410 is one o
SPV355 is one o
SPV315 is a ste
SPV235 is one o
JIS G 3115 Stee
Under JIS G3115
Hot rolled atmo
Weathering stee
SMA490CP weathe
Hot rolled atmo