JIS G3114 SMA490AP

Hot rolled atmospheric corrosion resistance steel plate SMA490AP,Hot rolled atmospheric corrosion resisting steel coil SMA490AP.The main difference between these three steel grades SMA490AP,SMA490BP and SMA490CP is impacting test values,for weather resistant steel plate SMA490AP,no need to do low temperature impacting test according to standard,for weather resistant steel plate SMA490BP,it shall be done imapcting test under 0 centigree with minimum charpy absorbed energy 27J.

Mechnical property for SMA490AP Corten steel:

Thickness (mm)
SMA490AP ≤ 16 > 16 ≤ 40 > 40 ≤ 75 > 75 ≤ 100 > 100 ≤ 160 > 160
Yield strength (≥Mpa) 365 355 335 325 305 295
Tensile strength (Mpa) 490-610

Chemical composition for SMA490AP Corten steel (Ladle Analysis Max%)

Main chemical elements composition of SMA490AP
C Si Mn P S Cu Cr Ni
0.18 0.55 1.40 0.035 0.035 0.20-0.35 0.30-0.55

JIS G3114 standard is based on the provisions of Article 12, Paragraph 1 applied mutatis mutandis pursuant to Article 14 of the Industrial Standardization Act.

Technical Requirements & Additional Services:

  • High tension test
  • Chemical Analysis
  • Low temperature impacting test
  • Ultrasonic test under EN 10160,ASTM A435,A577,A578
  • Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
  • Shot blasting and Painting,Cutting and welding as per end user’s demands

 

The Iron and Steel Federation (JISF) has requested that the Japanese Industrial Standards be revised with the draft of the Industrial Standards.This is a Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry after deliberation by the study group.As a result, JIS G 3114 : 2008 was revised and replaced with this standard.

Related products
SPV235 is one o
Hot rolled atmo
Hot rolled atmo
SMA490CP weathe
Hot rolled atmo
Hot rolled atmo
We offer SMA490
We offer SMA400
For atmospheric
JIS G3114 hot r
We offer SMA400
Mo alloy boiler