SPV315 is a steel material with a lower limit of yield point (yield strength) of 315 MPa, and is a Si-Mn steel plate material. It is one of six types of SPV materials that are made as standard for steel materials for pressure vessels. Since it is for pressure vessels, it is characterized by not only tensile strength but also parameters such as yield point, components that affect weldability and bendability that affect workability, which are necessary for calculation of fracture strength. The plate thickness is 6mm or more and 150mm or less, and this plate thickness range is standard for all SPV steel materials other than SPV235.
Some of these grades have undergone a process called thermal processing control, and it is known that low-temperature toughness and weldability will be greatly improved when this is done. The standard stipulates values for carbon equivalent and weld crack susceptibility composition for SPV315 with thermal processing control.
SPV315 specific gravity
The specific gravity is based on 7.85, which is the same as that for hot-rolled steel sheets, but it varies strictly depending on the components.
Technical Requirements & Additional Services:
- High tension test
- Chemical Analysis
- Low temperature impacting test
- Ultrasonic test under EN 10160,ASTM A435,A577,A578
- Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
- Shot blasting and Painting,Cutting and welding as per end user’s demands
Mechnical property for SPV315 boiler steel:
|SPV315||≥6 ≤ 50||> 50 ≤ 100||> 100|
|Yield strength (≥Mpa)||315||295||275|
|Tensile strength (Mpa)||490-610|
Chemical composition for SPV315 boiler steel (Ladle Analysis Max%)
|Main chemical elements composition of SPV315|