Production technology and performance characteristics of wear-resistant ceramic lined pipe

The wear-resistant ceramic lined pipe is manufactured by high technology production process – self – tendril combustion high temperature clutch synthesis method.The ceramic wear-resistant elbow is composed of corundum ceramics, transition layer and steel from inside to outside. The ceramic layer forms dense corundum porcelain at a high temperature above 2200℃ and forms a firm combination with the steel pipe through the transition layer.Because the wear-resistant ceramic lining pipe has wear-resistant, corrosion-resistant and heat-resistant properties, it can be widely used in electric power, metallurgy, mining, coal, chemical industry and other industries as conveying sand, stone, coal powder, ash, aluminum fluid and other abrasive particle materials and corrosive medium, is an ideal abrasion resistant pipe.Next we will understand the performance characteristics of wear-resistant ceramic lining pipe.

Performance characteristics of wear-resistant ceramic lined pipe:
Wear-resistant ceramic tube has good wear resistance: the ceramic lining of wear-resistant ceramic elbow is wear-resistant engineering ceramic, its hardness (HRA)≥84, and its wear resistance is more than 10 times that of high chromium wear-resistant cast iron alloy pipe fitting.Using 5mm thick ceramic layer, its actual wear – resistant service life will be equivalent to 50mm thick wear – resistant cast steel.
Corrosion resistance: choose different wear-resistant ceramic materials, have excellent corrosion resistance to different corrosion medium, acid, alkali, salt and other strong corrosion medium and halogen salt corrosion characteristics
The wear-resistant ceramic elbow has good resistance to high temperature: the wear-resistant ceramic itself has the resistance to high temperature above 1200 degrees Celsius. Through rational design and different composite methods, the wear-resistant ceramic pipe fitting can operate in the humidity range from -50℃ to 800℃ for a long time, especially suitable for high temperature burners.
Equipment lining.Lining engineering ceramics with high strength, high hardness, excellent resistance to wear and corrosion.
Ceramic wear-resistant elbow reduces engineering cost: wear-resistant ceramic pipe fittings are mainly used for liquid and solid two-phase flow materials and corrosive media of conveying belt particles, which can be used to replace expensive stainless steel pipe, high chromium cast steel pipe and hard alloy wear-resistant pipe, which can directly reduce the engineering cost and prolong the use at the same time.
Long service life: cost-effective products, can save the cost and time maintenance, replacement of materials.
Ceramic wear – resistant lining elbow manufacturing process is simple;Light weight, easy transportation and installation.

Related products
Ceramic lined t