Location

Shanghai, China

Telephone

+8621 3378 0199

Mail to

sales@sunnysteel.com

Rare Earth Alloy Wear-resisting Casting Pipe

We are manufacturer of Rare Earth Alloy Wear-resisting Casting Pipe and supply high quality Rare Earth Alloy Wear-resisting Casting Pipe in both large and small quantities worldwide and offer you the best prices in the market.

Features of Rare Earth Alloy Wear-resisting Casting Pipe:

My company and major universities jointly developed a new type of high-strength wear-resistant alloy of rare earth products, it is crucial to overcome the technical material of cold, heat, cracking, brittleness, deformation, etc.,

With high strength, good toughness, corrosion resistance, weldability well, the process is using the most advanced centrifugal casting, long life, under the same conditions than the high manganese steel materials, wear the unit around one-third of the high manganese steel, high manganese steel service life is three times above.

Bends and branches seamless steel pipe sections with supporting the use, installation and maintenance more convenient.

Download Abrasion resistant ceramic lined pipes, Bends and elobws specifications & size range

Performance indicators:

  • Grade: ZG40CrNiMoMnSiRe
  • Hardness: HRC ≥ 40
  • Impact toughness: ≥ 14J/cm2
  • Tensile strength: ≥ 700MPa

Uses:

Rare high-strength low-alloy heat-resistant, wear-resistant steel parts for the power plant boiler systems in coal, powder, ash slagging pipeline.

Packing:

  • Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested. 
  • Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles. 

We have a team of experienced professionals with years of experience in manufacturing.


What is the material of the rare earth wear-resistant alloy pipe

The wear and tear of rare earth alloy is a phenomenon of material loss caused by relative motion between objects. Rare earth wear-resistant alloy steel tube wear-resistant materials can resist wear and prolong the life of the product. Mainly divided into single metal pipe and composite pipe. According to the shape can be divided into straight pipe, elbow, tee, four-pass, reducer, Fangyuan section and other special-shaped tubes.

Surface Quality requirements: the internal and external surface of the pipeline should be smooth and smooth, no burrs, burrs, sticky sand, more meat or lack of meat, no cracks, loose, stomata or bubbles.

Rare earth wear-resistant pipe, is in the area of serious wear, such as elbow, reducer, suction nozzle, such as the use of the model as a whole casting, especially in the outside of the elbow wear particularly significant parts, the external diameter of the method to change the center of the design, so that the wear serious parts of the local thickening, but also according to various requirements, Make a variety of irregular shaped pipe fittings to meet the design requirements, straight pipe is centrifugal casting. Second, the rare earth wear-resistant alloy containing CR, Ni, Mo, W, V, Cu and many other alloying elements, it not only has a high hardness, but also has a certain mechanical properties, at room temperature with good welding performance, and has the possibility of cutting and on-site openings, but also has a certain corrosion resistance. In the actual use of the process, whether it is in the steel slag pipe, or in the coal preparation plant, such as the use of washing pipes have achieved very good results, in the same conditions compared with high manganese steel, the unit wear is about 1/5 of the higher manganese steel, the service life is high manganese steel 4-5 times, elbow and branch pipe can be used with seamless pipe fittings, installation, maintenance more convenient.

High strength and low alloy rare earth heat-resisting and wear-resisting steel pipe parts are suitable for coal conveying, powder feeding, ash discharging pipeline and coal preparation plant transportation pipeline in thermal power plant boiler system.

Rare earth alloy wear-resistant pipe Material composition table

No.GradeChemical component
CMnSiCrNiMoWVNbCuReNSP
1ZGCr20Mo3Ni3Re2.50/
3.0
1.50/
2.0
0.80/
1.20
18.0/
23.0
2.50/
3.0
   1.20/
1.50
 ≤0.06≤0.06
2ZGCr28Mo3Ni3Re2.80/
3.30
1.50/
2.0
1.80/
1.20
25.0/
300
2.80/
3.30
   1.80/
2.30
 ≤0.06≤0.06
3ZGCr15Mo3Re2.60/
3.20
1.20/
1.60
1.0/
1.50
12.0/
16.0
2.50/
3.0
   1080/
1.20
 ≤0.04≤0.05
4ZGCr25Ni4Si2Re0.35/
0.45
0.80/
1.20
1.20/
1.60
23.0/
26.0
3.50/
4.50
     ≤0.035≤0.045
5ZGCr15Mo2Re1.80/
2.20
0.80/
1.20
1.0/
1.50
14.0/
18.0
2.0/
2.50
   0.80/
1.20
 ≤0.04≤0.05
6ZG40CrMnMoNiSiRe0.40/
0.50
1.20/
1.60
1.50/
2.0
1.10/
1.60
1.0/
1.50
   ≤0.035≤0.04
7ZG40Cr5Ni3MoVWRe0.35/
0.45
0.80/
1.2
1.20/
1.60
23.0/
26.0
2.50/
3.50
   ≤0.045≤0.055
8ZG50Cr18Ni4MoVWCuRe0.45/
0.60
1.0/
1.40
1.50/
2.0
16.0/
20.0
3.50/
5.0
 0.40/
0.60
 ≤0.35≤0.35
9ZGCr25Ni2Mo2WVCuRe0.40/
0.60
0.80/
1.20
1.20/
1.60
23.0/
26.0
1.50/
2.50
 0.20/
0.40
 ≤0.035≤0.035
10ZG40Cr25Ni6MoWVCuRe0.35/
0.45
1.2/
1.60
1.50/
2.0
23.0/
26.0
5.0/
7.0
 ≤0.35≤0.045
11ZG90CrMn13MoSiVRe0.40/
1.30
11.0/
14.0
0.30/
0.80
       ≤0.04≤0.04
12ZGCrMu10MoSiVRe1.0/
1.20
8.0/
11.0
0.30/
0.80
       ≤0.04≤0.04
13ZGW5Cr4Re2.50/
3.50
1.5/
1.0
0.50/
1.0
35.0/
4.50
      ≤0.10≤0.15
14ZGCr25MoRe2.30/
3.0
0.50/
0.90
0.30/
0.60
23.0/
28.0
      ≤0.06≤0.10
15ZGCr15MoRe3.0/
3.50
≤1.00.15/
1.0
15.0/
18.60
 2.80/
3.30
     ≤0.06≤0.10
16ZG30CrMnSi0.27/
0.33
1.30/
1.50
1.20/
1.50
      ≤0.03≤0.04
17ZG40CrNiRe0.28/
0.43
1.10/
1.40
0.80/
1.0
      ≤0.06≤0.10
18ZG33Cr13Ni4Re0.30/
0.35
≤0.80≤0.6012.0/
14.0
4.0/
4.50
     ≤0.06≤0.10
19ZG40CrSiN0.35/
0.45
1.0/
1.50
1.50/
2.0
       ≤0.04≤0.08

Note: All content in this article is for reference only.

发表评论