Sunny Steel offers an extensive range of seamless mechanical tubing is manufactured to meet your specific application requirements. Controlled modifications and adjustments are made to the tube making process for each order and take into consideration end use and all finishing operations (including heat treatment) that will be performed after you have received the tubing.
Your tubular products representative will be happy to work with you to develop the information that is required.
- For Mechanical sparements for cylinder and struction
- For mechanical and pressure use, and also for transporting steam,water,gas and etc.
Grade and Chemical Composition (%)
Typical Mechanical Properties
|Grade||Condition||Tensile strength||Yield stength||Elongation|
Tubular products seamless mechanical tubing is furnished in both cold-drawn and hot finished form in a wide range of sizes, from 1.375″ to 7.750″ OD and from 0.188″ to 1.625″ wall thickness.
Hot-finished carbon and alloy—10,000 pounds, or 4,536 kilograms minimum.
Cold-drawn carbon and alloy—5,000 pounds minimum or 125 feet minimum, 2,268 kilograms minimum or 38.1 meters minimum, whichever is greater.
Quantity variation—standard ±10% of the ordered weight, or ±25 feet or 7.61 meters, whichever is greater.
Tubular Products special seamless tubing configurations start with the highest quality steels. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.
The configurations are formed from round tube by cold drawing. The tube is drawn over a shaped mandrel or through a shaped die, or both. Improved tolerances, finishes and mechanical properties result.