Presenting a wide range of precisely engineered range of MSS SP75 WPHY 60 Pipe Fitting. Fabricated from superior quality raw material, our MSS SP75 WPHY 60 Pipe Fitting are ideal for multiple connections of pipes.[……]
Presenting a wide range of precisely engineered range of MSS SP75 WPHY 60 Pipe Fitting. Fabricated from superior quality raw material, our MSS SP75 WPHY 60 Pipe Fitting are ideal for multiple connections of pipes.[……]
Sunny Steel manufactures and export high quality MSS SP75 WPHY 46 Pipe Fitting which are used as pipes & fittings in several petrochemical or other commercial industries.[……]
MSS SP-97 Standard Practice covers essential dimensions, finish, tolerances, testing, marking, material, and minimum strength requirements for 90 degree integrally reinforced forged branch outlet fittings of buttwelding, socket welding, and threaded types.[……]
ASTM A420/A420M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service.[……]
Pipe fittings are necessary to join together pipes, or to change the direction of an existing pipe. Pipes and pipe fittings are made of a variety of m[……]
The WPB is not short hand for any process. It is simply an identifier developed by ASTM. The fittings in question are manufactured in the same manner[……]
Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected[……]
A pipe cap is a kind of Pipe fitting. It usually acts as a protective device designed to protect pipe ends of various pipes. The main use of pipe caps is to waterproof the connections. [……]
A pipe cross is a kind of pipe fitting. It is used in the place where four pipes meet together. The pipe cross may have one inlet and three outlets, o[……]
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. [……]
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.[……]
Buttweld is to connect pipes and fittings ends by a butt welding process. [……]
Pipe fittings are widely demanded for any piping and plumbing systems used in industrial and commercial applications.[……]
ASTM A861 Standard specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.[……]
EN 10216-1 standard specifies Seamless steel tubes for pressure purposes.[……]
ASTM A105 is the Standard Specification for Carbon Steel Forgings for Piping Applications[……]
[……]
The standards given to various products significantly contributes towards increasing international trade which in turn bridges the quality gap between the manufacturers, producers and buyers of different nations. In pipe fittings as well, standards play a vital role. The manufacture and installation of pipe fittings is tightly regulated by various standards and codes.[……]
This makes pipefitting necessary in different industries such as waste management, agriculture, and manufacturing.
Pipe fitting work is done in man[……]
Our induction pipe bending services are ideal for the the general and process pipework industries, offshore oil and gas production sectors and the power generation. We provide an exceptional range of post-bend heat treatment solutions.[……]