ASTM A998 Standard practice covers the structural design of reinforcement for fittings in factory-made, round corrugated steel pipe, conforming to Specifications A760/A760M or A762/A762M, for use as storm and sanitary sewers and other buried applications.[……]
ASTM A954-02 Standard specification covers seamless and straight-seam welded austenitic steel pipe intended for high-temperature and general corrosive service, having a specified minimum chromium content of less than 10.50 %.[……]
ASTM A943 Standard specification covers spray-formed seamless austenitic stainless steel pipe intended for high-temperature and general corrosive service. [……]
ASTM A930 – 09 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits[……]
ASTM A929 Standard specification covers steel sheets used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses.[……]
ASTM A928 standard specification covers standard requirements for ferritic/austenitic (duplex) stainless steel pipe that is electric fusion welded with addition of filler metal suitable for corrosive service. [……]
ASTM A926 Standard test method provides a means of determining an abrasion rate (weight and calculated average thickness loss) when comparing materials, coatings, pavings, or linings under test conditions that will be subjected to abrasive bed loads.[……]
ASTM A885 Standard specification covered steel sheet, composite coated, used in the manufacture of corrugated pipe used for sewers, culverts, and underdrains. [……]
ASTM A872 standard specification covers centrifugally cast ferritic/austenitic steel pipe intended for general corrosive service.[……]
ASTM A849 Standard specification covers post-applied coatings, pavings, and linings for corrugated steel pipe and corrugated steel structural plate pipe, pipe-arches, and arches coated, paved, or lined with specified materials over either metallic coatings or metallic coatings with polymer coatings. [……]
ASTM A814 Standard specification covers two classes of flanged and cold-bending quality cold-worked straight-beam single or double welded austenitic steel pipe intended for high-temperature and general corrosive services.[……]
Corrugated steel pipes have many different uses, most of them in construction. The specifications for these pipes can vary widely depending on what the intended use of the pipe is. Corrugated metal pipes are made of either steel or aluminum.[……]
ASTM A358 / A358M – 08a Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications[……]
The Super Alloys management team are amongst the most experienced professionals in the market. Supported by professional metallurgists and technicians[……]
Ferritic stainless steel is a type of chromium alloy that has ferritic, body-centered cubic crystal structures. [……]
Offered in both 304/304L and 316/316L alloys, our stainless steel pipe blends corrosion resistance with strength and is ideally suited for use in harsh conditions such as saltwater, chemical and acidic environments. [……]
