European Standards for steel

With so many European Standards specifying steel and steel products and replacing national standards, it is necessary to have a European designation system for steel.
DIN17175/ EN10216 Seamless Steel Tubes

DIN17175/ EN10216 Seamless Steel Tubes

Such a system is well established and implemented in almost all the European Standards. European Standards for steel products are the responsibility of the European Committee for Iron and Steel Standardization.

ECISS has the task of developing European Standards for the definition, classification, testing, analysis and technical delivery requirements for the products of the iron and steel industry and the implementation of these as national standards by members in order to achieve technical harmonization within the European Union. ECISS is an Associated Standards Body within the framework of the European Committee of Standardization.

European Standards published in the UK have the status of a British Standard and are characterized by the prefix ‘BS EN’ to their reference number. Other national standards bodies of Member States of the European Union publish identical European Standards with their appropriate prefixes, e.g. in Germany, ‘DIN EN’, in France ‘NF EN’, in Sweden ‘SIS EN’ etc. European Standards are essentially voluntary instruments except for certain situations, e.g. Public Procurement Directives, Construction Products Directive. According to the CEN rules, members in the UK, that is BSI, are obliged to announce the availability of European Standards and publish the identical text and to withdraw any conflicting national standards.

BS3059 II 360

BS 3059-2:1990 requirements for tubes not exceeding 127 mm outside diameter and 12.5 mm thickness. Depending on the operating temperature, it can be divided into two kinds general boiler pipes and high-pressure boiler pipes.

BS3059-II 440

BS 3059 PART 2-78 is the standard specifies the steel boiler and superheter tubes carbonn alloy and specified elevated temperature prop.

EN10216-1

P235GH is a European specified steel for use in pressure vessels, boilers and heat exchangers. The composition of this steel makes it ideal for applications where elevated working temperatures are the norm and the material is used by fabricators throughout the oil, gas and petrochemical industry.

Seamless steel tubes for pressure purposes

  • EN 10216-1    Non-alloy steel tubes with specified room temperature properties
  • EN 10216-2    Non alloy and alloy steel tubes with specified elevated temperature properties
  • EN 10216-3    Alloy fine grain steel tubes
  • EN 10216-4    Non-alloy and alloy steel tubes with specified low temperature properties
  • EN 10216-5    Stainless steel tubes

Material

  • z.Bsp: P235GH TC1, P235GH TC2, 16Mo3
DIN 17175

DIN 17175 steel pipes are used in boiler installations, high-pressure pipelines and tank construction and special machinery for both high (градусов 600) temperature and high-pressure devices. This alloy steel pipe is just a big class,and it has many classifivations.

Main Steel grade:
  • DIN17175 St35.8
  • DIN17175 St45.8
  • 15Mo3
  • 13CrMo44
  • 10CrMo910
EN 10028 – P265GH

P265GH is a weldable pressure vessel and boiler steel grade used by the world’s industrial fabricators. The material, which is ideally suited for elevated temperature service, is commonly found in the oil & gas, petrochemical and chemical industry.

DIN 2391

+ DIN 2391 seamless tubes

DIN 2391 standard specifies the Seamless steel tubes used forMechanical and Automobile.

The main products of steel / steel grade:

  • DIN2391-1 ST35
  • DIN2391-1 ST45
  • DIN2391-1 ST52
BSP British Standard Pipe

The British Standard Pipe (BSP) is a family of standard screw thread types that has been adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.

BS3059 Part I, BS3059-I 320 CFS

BS 3059 standard accord to the steel boiler and superheater tubes. Part I-87 low tensile carbon steel tube without specified elevated temperature preperites.

DIN/EN steel pipe
GB steel pipes
JIS seamless pipes


Tech & Service of Seamless pipe

Seamless pipes are extensively applied for the nuclear device, gas, petrochemical, ship building and boiler industries. Seamless pipes dominates 65% of market share in Chinese boiler industry.

How to make seamless pipe(seamless pipe process)?
Hot Piercing Workshop
Piercing process
The cross roll piercing and pilger rolling process in the size range from approx. 250 to 660 mm outside diameter.
Precision cold drawn steel tube production process
Pipe weld cracks
often follow different mechanisms can be divided into two types of thermal cracking and cold cracking.
How to calculate a steel pipe and tube theoretic weight
Calculate a steel pipe?
Pipe fittings are necessary to join together pipes, or to change the direction of an existing pipe.
Pipe beveling
Pipe beveling is the process where an angle is formed between the edge of the end of a pipe or tube and a plane perpendicular to the surface.
Steel pipe cutting machine
Pipe cutting
Cutting tools have a grinding wheel piece cutting machine (also known as toothless saw), hand saw, cutter and other hand tools.
How to calculate a steel pipe and tube theoretic weight
Packing the steel pipes
There are probably hundreds of different methods for packing a pipe, and most of them have merit, but there are two principles that are vital for any method.
Condition on delivery:

It refers to the state of final plastic deformation or final heat treatment of the delivered product. The hot-rolled or cold drawn (rolled) state or manufacturing state generally delivered without heat treatment; the heat-treated state after heat treatment delivery, or the normalizing, tempering, solid solution, annealing according to the type of heat treatment status.

Delivery status Abbreviation Description

Cold-finished/hard
(cold-finished as-drawn)

BK No heat treatment after the last cold-forming process. The tubes therefore have only low deformability.
Cold-finished/soft
(lightly cold-worked)
BKW After the last heat treatment there is a light finishing pass (cold drawing) With proper subsequent processing, the tube can be cold-formed (e.g. bent, expanded) within certain limits.
Annealed GBK After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum.
Normalized NBK The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum.

Delivery according to actual weight or delivery according to theoretical weight

 


SUNNY STEEL

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763