Malleable Fitting

Malleable fitting are the fitting has the property of malleability.

Malleable Fittings

This is a physical property of metals and metalloids, or any kind of matter. We call a metal malleable when it can easily be deformed, especially by hammering or rolling, without cracking the metal.

We are manufacturer of Malleable Iron Pipe Fittings and supply high quality Malleable Iron Pipe Fittings in both large and small quantities worldwide and offer you the best prices in the market.

Malleable Iron Pipe Fittings(Forged High Pressure Pipe Fittings)

Our products are famous for the perfect finish, excellent resistance to wear, accurate fit and long trouble-free life.

They can be divided into three standards:

American standard:

Forged tee
ANSI maleable pipe fitting

DIN Standard:

Electric Galvanized Malleable Iron Pipe Fittings

Malleable Cast Iron Pipe Fittings (DIN EN std 150#)
Galvanized Malleable Iron Pipe Fittings
Galvanized Malleable Pipe Fittings

We manufacture over 600 dimension types of fittings (from ¼” to 4″)
that can have black or galvanized surface.


Malleable Iron Pipe Fittings Description of The Items Sizes:1/4"-6"

Fig No. Name
1090 Elbows 90,plain,equal
90 Elbows 90,banded,equal
92 Street,Elbows90,banded,equal
1120 Elbows 45,plain
120 Elbows 45,banded
121 Steet Elbows 45,banded,equal
1130 Tees, plain,equal
130 Tees, banded,equal
1180 Crosses,plain,equal
180 Crosses,banded,equal
1221 Side Outlet Elbows,plain
1223 Side Outlet Elbows,banded
1220 Sockets(Coupling),plain,with ribs
220 Sockets(Coupling),banded,with ribs
1270 Sockets(Coupling),plain,parallel threads,with ribs
270 Sockets(Coupling),banded,parallel threads,with ribs
330 Unions,flat seat,without gasket
340 Unions,conical joint,iron to iron seat
342 Unions,conical joint,brass to iron seat
291.290 Plugs
300.301 Caps
529.529A Extension pieces
280 Hexagon Nipples equal
321 Round Flanges,light pattern,without bolt hole
310 Lock Nuts or Back Nuts
1 Bends 90,male & female,banded
2 Bends 90,female,banded
1090R Elbows 90,plain,reducing
90R Elbows 90,banded,reducing
1130R Tees, plain,reducing
130R Tees, banded,reducing
1240 Reducing Sockets(Reducers),plain,with ribs
240 Reducing Sockets(Reducers),banded,with ribs
241 Hexagon Bushings
245 Hexagon Nipples reducing
Differences Between Malleable Iron & Cast Iron

Although they both contain iron, there is a major difference between malleable iron and cast iron. The main difference being that malleable iron is, well, malleable and cast iron is not. But there are other differences as well. We’ll need to talk about what exactly these metals are and how they are made.iron door pull handles

What is Cast Iron?

Cast iron is the result of smelting ore in a furnace, creating pig iron which has a high carbon content. Alloys are then added to the iron which is poured into molds and allowed to cool.

What is Malleable Iron?

Malleable iron starts out as cast iron, but an annealing heat treatment is applied to the cast iron to make it more workable and increase ductility. Consequently, malleable iron has much lower carbon content than cast iron. There are three different types of malleable iron:

  • Blackheart
  • Whiteheart
  • Pearlitic
  • Production

To make malleable iron, foundry workers add hematite ore during the annealing process. Depending on the need for ductility, they may also add sodium, cerium, or magnesium.

Cast iron is typically smelted in a bloomery. Usually, the furnace becomes too hot for other types of iron making and this is when the iron absorbs the most carbon. It is then poured into molds for cooling.


Malleable iron is easier to work with to make more intricate designs, such as luxury iron doors. On the other hand, cast iron is better known for its castability, meaning it is easily poured into molds without premature cooling because of its low melting point.


The annealing process of malleable iron causes it to form small particles of carbon that are shaped irregularly. This gives the iron more strength while allowing it to keep ductility. Malleable iron is relatively easy to machine, and it is shock resistant.

Cast iron contains about two percent carbon, which makes it stronger and more resistant to rusting. But this also makes it more difficult to machine because it is difficult to get a smooth surface with the material. This can also make cast iron more costly to work with as it reduces tool life.


Both cast iron and malleable iron are similarly priced. However, cast iron tends to be cheaper because it has a low melting point requiring less energy to heat it.


Cast iron is used to make castings such as barbell weights in a gym or engine blocks. Malleable iron is better suited for decorative elements like iron doors.

A cross fitting allows four direction transition in pipeline fields.

Fitting specification, Standard and identification

There are different varieties of pipe fittings made of various materials and available in various shapes and sizes.


Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763