Monel k-500

Monel K-500 Chemical composition:

Alloy	%	Ni	Cu	Al	Ti	Fe	Mn	S	C	Si
Monle K500	Min.	63	27.0	2.30	0.35
	Max.		33.0	3.15	0.85	2.0	1.5	0.01	0.25	0.5

Monel K-500 Physical properties :

Density	8.44 g/cm3
Melting point	1315-1350℃

Monel K-500 minimum mechanical properties in the room temperature:

Status	Tensile strength Rm N/mm2	Yield strength RP0.2N/mm2	Elongation A5 %
Monel K500	1100	790	20

Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.

Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.

Industries Served:

• gas & oil extraction
• chemical processing
• marine engineering

BACK  |   PRINT   |   RSS  |   TO TOP

MONEL ®alloys MONEL®Monel 400 MONEL®alloy K-500 Inconel®alloys Inconel 600 Inconel 601 Inconel 625 Inconel 718 Inconel X-750

INCOLOY®alloys Incoloy 800H Incoloy 800HT Incoloy 825 Incoloy 901 Incoloy 926 Inconel 600 Inconel 601

Hastelloy®alloys Hastelloy B Hastelloy B-2 Hastelloy C-4 Hastelloy C-22 Hastelloy C-276 Hastelloy N10675

Other alloys A-286 254SMO Nimonic 80A Invar alloy 904L Duplex S31803

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges..

Products	Standard
Sheet/Plate content	ASTM B443, AMS 5599, AMS 5869, ISO 6208, VdTüV 499, BS 3072NA21, EN 10095, DIN 17750
Round Bar/Wire content	ASTM B446, AMS 5666, AMS 5837, ISO 9723, ISO 9724, ISO 9725, VdTüV 499, BS3076NA21, EN 10095, DIN 17752, DIN 17753, DIN 17754
Pipe & Tube content	ASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581, ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751
Fittings content	ASTM B366
Forgings content	ASTM B564, AMS 5666
Weld Wire content	AWS A5.14 ERNiCrMo-3, AWS A5.11 ENiCrMo-3, DIN 1736 SG NiCr20Mo9Nb