Classification, structure and industry application of wear resisting elbow

We usually line piping components, such as pipes or pipe bends, with mineral, ceramic or metal materials to make them resistant to wear.

Principle of a wear-protected pipe elbow
Principle of a wear-protected pipe elbow

We also manufacture hard cast piping components.

Now, in power plants, steel mills, petroleum and petrochemical, coal, cement building materials, mines and other industrial and mining enterprises, in the wear of serious material systems, the widespread use of wear-resistant pipes, but because of the characteristics of wear-resistant piping, enterprise procurement and technical personnel in the procurement of wear-resistant pipes and wear This is mainly from the user's understanding of the wear-resistant pipeline is not comprehensive, wear-resistant elbow and wear-resistant pipe selection To do a comprehensive analysis.

Classification of wear-resisting elbow:

Structure of wear-resisting elbow:

Wear-resistant elbow industry applications:

  1. power plant: pulverized coal, ash removal, dust removal, desulfurization
  2. steel mills: flue gas dust, flushing slag
  3. Petroleum and petrochemical: FCC pipeline, biogas gas pipeline
  4. Cement plant: pulverized coal pipe, kiln head kiln end
  5. coal washery: all plant inside and outside the pipeline, tee Qualcomm, shunt box
  6. Alumina: over material pipe elbow

Abrasion Resistant Pipe Solutions

Conveying highly abrasive materials, steel piping systems are under constant attack often over long distances.


Because the outer surface behaves like mild steel, the product can be cut and welded with proper procedure in the field, configured into a variety of fittings, and can accept the standard end options of flanges, weld rings and couplings.


We are Quality Department tests and ensures all of our products are 100% inspected unreported. To an offer we customers additional corps of mind, all our products carry a 24-month warranty against defects or faulty workmanship.We fluid-flow products such as pipe and fittings, chokes, orifice plates, etc, carry a warranty against, erosion, defects, and/or faulty workmanship.

The warranty is determined to each creator and the maximum duration maximally in service. Should any of the RS fail within the warranty period, We'll replace or repair the defective product (s) at No. end user. Please contact the Sunny steel for details on the How to obtain a warranty for our products.


As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.