Integral calcined ceramic lined pipe is made by integrally firing ceramic pipe fittings, and casting ceramic pipes with special filling materials inside the steel pipe for assembly.
The alumina content of the ceramic fittings lined with alumina ceramic pipes is not less than 95%. 200T dry press forming, sintering temperature up to 1670 ℃. Its advantages are: smooth inner wall, good sealing, and very good wear resistance and corrosion resistance.
According to the mold, the ceramic powder is sintered into a ceramic pipe, and then combined with the steel pipe. The outer wall and inner wall of the alumina ceramic pipe are assembled with special filler (cement or epoxy resin) inside the steel pipe, and then formed by isostatic pressing. In the sintering process, the furnace cools down quickly, is easy to crack, and the process is more complicated. The pipes are generally white.
Desulfurization ceramic wear-resistant pipes are assembled by firing ceramic pipe fittings as a whole, and pouring the shaped ceramic pipes inside the steel pipe with special fillers. The alumina content of the ceramic pipe fittings lining the desulfurization wear-resistant pipeline is not less than 95%. 200T dry pressing, sintering temperature is as high as 1670℃. Its advantages are: smooth inner wall, good sealing, and very good wear resistance and corrosion resistance.
According to the mold, the ceramic powder is sintered into a ceramic pipe, and then combined with the steel pipe. The outer wall of the ceramic pipe and the inner wall of the steel pipe are assembled by pouring a special filler (cement or epoxy resin) inside the steel pipe, and then isostatically pressing. During the sintering process, the furnace cools quickly, cracks easily, and the process is more complicated. The pipe is generally white.
Power plant boiler pulverization system pipes, including pulverized powder conveying pipes, coarse and fine powder separator pipes, coal drop pipes, primary air pipes, secondary air pipes, tertiary pipes and burner pipes of the combustion system, and the discharge of the ash and slag discharge system Slag pipeline, powder return pipeline, dry ash transportation pipeline;
Steel plant raw material conveying pipes, receiving pipes, dust removal pipes, ash discharge pipes, ash falling pipes, batching mixing pipes, mill outlet pipes, coal-fired pipes, pulverized coal pipes, separator pipes, burner square pipes, etc. ；
Cement plant separator outlet pipes, separator inlet pipes, dust collection pipes, vertical mill outlet pipes, circulating air pipes, coal mill high temperature fan air pipes, discharge pipes and other worn bends.
Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.
Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.
Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.
The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.
Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.
The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.
