The Performance Advantages Of Wear-Resistant Ceramic Lined Pipes

The wear-resistant ceramic lined pipe uses steel pipe as the external support, and is lined with ceramic to withstand impact and wear.

Therefore, the performance and advantages of the wear-resistant ceramic pipe mainly come from the performance characteristics of the lined ceramic.

  1. Wear resistance:
    The lining ceramic of wear-resistant ceramic tube is mainly made of high-purity alumina, which is made of ceramic material through a special sintering process. .
  2. Corrosion resistance:
    Wear-resistant ceramics are stable α-alumina formed by alumina powder calcined at a high temperature of about 2000°C. They have stable chemical properties and are difficult to react with acid and alkali, so they can resist most acid and alkali corrosion.
  3. High temperature resistance:
    The wear-resistant ceramics are originally sintered in a high temperature environment, and the lined ceramics can work normally in an environment of more than 1000 degrees, but the wear-resistant ceramic tubes are bonded together by a binder. The high temperature resistance limits the temperature resistance of the pipeline, so the temperature resistance range of the general wear-resistant ceramic pipe is -20 ℃ – 500 ℃. However, wear-resistant ceramic tubes produced by mechanical self-locking or one-piece molding avoid the limitation of adhesives and can withstand high temperatures of 1000 °C.
  4. Erosion resistance:
    The wear-resistant ceramic tube lined with ceramic has high smoothness and small connection gap, and shows good durability for large particle erosion and gas dust erosion.
  5. Light weight, saving manpower and material resources:
    Compared with high chromium cast iron and cast stone pipes, wear-resistant ceramic pipes have low density and light weight. It is convenient for installation, transportation and maintenance, reduces the load of the support and hanger, and saves manpower and material resources.

【H】 Ceramic lined pipe

Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.

【H】 Cast basalt lined steel pipe

Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.

【H】 Ceramic Tile Lined Pipes

Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.

【H】 Rare earth alloy wear-resistant pipe

The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.

【H】 Tubes Erosion Shields

Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.

【H】 ASTM A213 T91 Alloy Tube

The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.

Ni-Hard Wearback Pipes Ni-Hard Wearback Pipes
//右侧淡出对话框