DIN 17175 13CrMo44 seamless steel tubes are high-temperature pipes that are designed to withstand high pressure and extreme temperatures.
Download PDF
DIN 17175 13CrMo44 seamless steel tubes are made from alloyed steel and are used in various industries where high temperature and pressure conditions are present.
The 13CrMo44 seamless steel tubes are suitable for applications in steam boilers, gas turbines, and chemical plants, where temperatures can exceed 500°C. The tubes are resistant to corrosion and are ideal for use in highly corrosive environments.
The chemical composition of the 13CrMo44 steel consists of carbon, chromium, molybdenum, and sometimes vanadium. The molybdenum content provides the tubes with increased strength and resistance to high-temperature oxidation.
The tubes are available in various dimensions and can be customized as per customer requirements. They are also subjected to rigorous quality checks to ensure that they meet the required specifications, such as tensile strength, yield strength, and elongation.
In conclusion, DIN 17175 13CrMo44 seamless steel tubes are widely used in high-temperature and high-pressure applications due to their excellent mechanical properties, corrosion resistance, and durability.
DIN 17175 13CrMo44 Seamless Steel Tubes can be used to manufacture steam boilers, pipes, pressure vessels and instruments operating at temperatures up to 600 ° C and at high temperatures.
| Steel Grade | Thermal processing ℃ | Normalizing℃ | Tempering | ||
| Grade | Material number | Quenching temperature ℃ | Tempering temperature ℃ | ||
| 13CrMo44 | 1.7335 | 1100 to 850°C | - | 910-940 | 660-730 |
| Grade | Chemical composition | |||||
| C | Si | Mn | P、S | Cr | Mo | |
| 13CrMo44 | 0.10-0.18 | 0.10-0.35 | 0.40-0.70 | ≤0.030 | 0.70-1.10 | 0.45-0.65 |
| Standard | Grade | Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) |
| DIN 17175 | 13CrMo44 | 440-590 | ≥290 | ≥20 |
| Project | Standard | Size range | Tolerance | |||
| Outer diameter | DIN17175 | Hot rolled steel pipe | OD ≤ 100mm | ± 0.75%( Min ± 0.5mm ) | ||
| OD＞ 100~ 320mm | ± 0.9% | |||||
| Cold drawn steel pipe OD ≤ 120mm | ± 0.6%( Min ± 0.25mm ) | |||||
| Wall thickness | DIN17175 | OD ≤ 130mm | WT ≤ 2Sn | +15%~-10% | ||
| WT ＞ 2Sn~4Sn | +12.5%~-10% | |||||
| WT ＞ 4Sn | ± 9% | |||||
| 130 ＜ OD ≤ 320mm | WT ≤ 0.05OD | +17.5%~-12.5% | ||||
| 0.05OD ＜ WT ≤ 0.11OD | ± 12.5% | |||||
| WT ＞ 0.11OD | ± 10% | |||||
The tube should meet the requirements of the ring test. For the expansion rate (diameter change) of the ring-shaped flaring experiment, no impermissible defects (such as cracks, crepe, folding, and delamination) shall occur during the test.
The tube must have a manufacturing method that achieves a relatively smooth inner and outer surface, so that it is possible to use either a hot rolling method or a cold rolling method. Tubes should not have unacceptable cracks, creases and folds. As long as the wall thickness of the steel pipe does not exceed the allowable dimensional deviation, and does not affect the performance of the steel pipe, it is permissible to create some uneven and shallow longitudinal scratches during the manufacturing process. Mechanical machining (such as buffing) can be used to remove the slight subsidence of the surface, but not to reduce the minimum allowable wall thickness.
Reference data for heat treatment temperature
Hot working is possible from 1100 to 80 ° °C, and the temperature can be reduced to 750 °C during processing.
In the matching-correction work of the local department, attention should be paid to the effective specification of hot work; there should be a supervisory temperature system. In the higher temperature range, ie 1100 to 900 °C, it is suitable for forging and pier thickening, about 85 °C, and the temperature can be lowered to above 75 °C during the processing.
For example, before the last process, or during the same hot working process, if the heating temperature of the workpiece is above the normalizing temperature but not more than 1000 ° C, and the deformation process is above 75 ° C, or ———— In the last process, the degree of deformation does not exceed 5% - at the end of 7 00 °C, then the normalizing of the St35.8, St45.8, 17Mn4, 19Mn5, and 15Mo3 steels is superfluous. The 13CrMo44 and 10CrMo910 only need to be tempered.
For multiple times and/or long time heat treatments at temperatures around 1000 to 1000 °C, the workpiece should be cooled to around 350 °C before the last deformation process. If the normalizing or quenching and tempering treatment is more than enough, then the temperature at which the steel is hot-worked should not exceed 1 000 °C.
Conversely, if the molding end temperature is above 10 °C, then the St35.8, St45.8, 17Mn4, 19Mn5, and 15Mo3 steels must be normalized, while the 13CrMo44 and 10CrMo910 should be tempered.
14MoV63 and X20CrMoV121 steels should be reconditioned after hot work.
Pipes made of steel according to this standard may be cold-worked, such as pipe bending, flaring, drawing and pipe cutting; for X20CrMoV121 and 14CrV63 steels, the high yield point and tensile strength shall be noted. After bending, expanding, and cold drawing with normal deformation, there is no need to supplement the heat treatment.
With years of expertise, we provide a wide range of steel tube processing services. From basic sawing and machining to complex bending and upsetting operations, we support you at every stage of your project.
Our capabilities include eccentricity reduction and concentricity improvement through turning and grinding. We specialize in creating complex geometries using rotary swaging and axial forming, and offer property modifications through partial heat treatment to meet your exact requirements.
Alloy steel pipes are widely used in high-temperature, high-pressure and corrosive service environments where conventional carbon steel pipes cannot provide sufficient mechanical strength or long-term reliability.
Manufactured from premium alloy steels containing chromium, molybdenum, nickel and other alloying elements, these pipes provide excellent resistance to heat, pressure, oxidation and corrosion, making them ideal for demanding industrial processes.
Alloy steel pipes offer superior performance under severe operating conditions. Their enhanced mechanical properties provide excellent resistance to elevated temperatures, internal pressure, corrosion and long-term creep deformation.
Alloy steel pipes are selected for critical applications where operating temperatures, pressures or corrosive media exceed the capabilities of carbon steel.
| Service Condition | Typical Application |
|---|---|
| High Temperature | Boilers, superheaters, steam headers |
| Low Temperature | Cryogenic processing systems |
| High Pressure | Power generation and process piping |
| Corrosive Media | Chemical and petrochemical plants |
| Long-Term Creep Service | Thermal power stations |
| Product Type | Common Standards |
|---|---|
| Seamless Pipes | ASTM A335 P1, P5, P9, P11, P22, P91 |
| Butt Weld Fittings | ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91 |
| Forged Fittings & Flanges | ASTM A182 F1, F5, F9, F11, F22, F91 |
Sunny Steel supplies alloy steel piping products to customers worldwide across a wide range of industrial sectors. Our products are manufactured to international standards and are trusted in critical piping systems requiring long-term reliability.
Steel pipe delivery status(condition): cold / hard (BK), cold / soft (BKW), after cold stress relief annealing (BKS), annealing (GBK), normalized (NBK).
| Term | Symbol | Explanation |
|---|---|---|
| Cold-finished/hard (cold-finished as-drawn) | BK | No heat treatment after the last cold-forming process. The tubes therefore have only low deformability. |
| Cold-finished/soft (lightly cold-worked) | BKW | After the last heat treatment there is a light finishing pass (cold drawing). With proper subsequent processing, the tube can be cold-formed (e.g. bent, expanded) within certain limits. |
| Annealed | GBK | After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum. |
| Normalized | NBK | The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum. |
The general cold strip mills, volume should go through continuous annealing (CAPL unit) to eliminate cold hardening and rolling stress, or batch annealing reach the mechanical properties of the corresponding standard specifies. Cold rolled steel surface quality, appearance, dimensional accuracy better than hot-rolled plate, and right-rolled thin product thickness is about 0.18mm, so the majority of users favor.
Cold rolled steel coil substrate products deep processing of high value-added products. Such as electro-galvanized, hot dip galvanized, electro-galvanized fingerprint resistant, painted steel roll damping composite steel, PVC laminating steel plates, etc., so that the excellent quality of these products has a beautiful, high resistance to corrosion, has been widely used.
Cold rolled steel coil finishing after annealing, cut the head, tail, trimming, flattening, smooth, heavy volume, or longitudinal clipboard. Cold-rolled products are widely used in automobile manufacturing, household electrical appliances, instruments, switches, buildings, office furniture and other industries. Steel plate strapping package weight of 3 to 5 tons. Flat sub-volume typically 3 to 10 tons / volume. Coil diameter 6m.
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for seaworthy delivery or as requested.
