What Are The Types Of Wear-Resistant Ceramic Lined Pipes?

Wear-resistant ceramic lining pipe can be divided into ceramic tile lining pipe, spot welding card type wear-resistant ceramic lining pipe, and ceramic sleeve lining pipe according to the production and installation method.

Wear-resistant ceramic tile lined pipeline

Wear-resistant ceramic tile lined pipeline is to paste the ceramic sheet inside the pipeline with a high-temperature strong adhesive, and form a firm anti-wear layer after heating and curing. The production process of Wear-resistant ceramic tile lined pipeline is simple, the cost is low, the production cycle is short, and the selection of ceramics is flexible. For example, we can use thick, high-quality ceramics in heavy wear areas and relatively economical ceramics in other areas.

Spot welding card type wear-resistant ceramic tile lined pipe

Spot welding card type wear-resistant ceramic tile lined pipe is based on wear-resistant ceramic tile lined pipeline, and a spot welding hole and a ceramic cap are added in the middle of the ceramic sheet, which greatly improves the wear resistance. The shedding ability is strong, the temperature limit of the adhesive is also weakened, the trapezoidal angle is formed between the ceramic sheets of the spot-welded card-type wear-resistant ceramic tube, the gap is small, and the erosion resistance is strong. However, the production process of this product is complicated and the production cycle is long.

Ceramic sleeve lining pipe

Ceramic sleeve lining pipe is made by firing the ceramic tube as a whole, and then casting it into the steel tube with a special filling material. Its inner wall is smooth and seamless, wear-resistant and corrosion-resistant. The corrosion resistance is very good and the temperature limitation of the adhesive is perfectly avoided. It can work in a high temperature environment of 1000 degrees. However, the production cycle of the one-piece wear-resistant ceramic tube is long and the cost is high. Integration is required depending on the situation.

These three kinds of wear-resistant ceramic lined pipes have their own characteristics, and the cost and cost are also very different. We need to choose reasonably according to the actual situation and use environment.

【H】 Ceramic lined pipe

Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.

【H】 Cast basalt lined steel pipe

Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.

【H】 Ceramic Tile Lined Pipes

Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.

【H】 Rare earth alloy wear-resistant pipe

The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.

【H】 Tubes Erosion Shields

Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.

【H】 ASTM A213 T91 Alloy Tube

The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.

Ni-Hard Wearback Pipes Ni-Hard Wearback Pipes
//右侧淡出对话框