Basalt pipe shield
Protective cast basalt pipe shields for increased pipe longevity in abrasive environments.
Ash sluicing channel panels are wear resistant lining components designed to protect ash and slurry channels from severe abrasion, impact and corrosion.
Ash sluicing channel panels are protective wear liners installed inside ash disposal channels, sluice ways, and slurry flow systems. They are typically made from cast basalt or other high-hardness wear-resistant materials.
These panels protect the structural steel or concrete channels from erosion caused by high-speed ash, slag, and water mixtures commonly found in thermal power plants and industrial waste handling systems.
An ash sluicing channel panel is a type of panel used in power plants for the lining of ash sluicing channels. These panels are designed to handle the flow of ash and other materials during the ash disposal process. They are typically made from materials that are resistant to abrasion and wear, such as cast basalt or cast stone.
The ash sluicing channel panel is an important component of the ash handling system in power plants. It helps to control the movement of ash from the boiler to the ash disposal area. The panels are installed in the ash sluicing channels to provide a smooth surface that allows for the efficient flow of ash.
The use of ash sluicing channel panels helps to prevent the build-up of ash and other materials in the channels, which can lead to blockages and operational issues. These panels are designed to withstand the harsh conditions of the ash disposal process, including high temperatures and abrasive materials.
Ash sluicing channel panel is mainly used in the power plant ash ditch lining. Our company's existing products includ various angles and types straight groove,curved groove, variable diameter groove, converging channel,etc.We can also customize production according to the drawings.
Protects against continuous ash and slag flow erosion in high-velocity channels.
Resistant to acidic and alkaline ash-water mixtures in industrial environments.
Strong structural stability under continuous hydraulic flow impact conditions.
Extends channel lifespan and reduces maintenance downtime significantly.
| Property | Value |
|---|---|
| Hardness | Mohs 8 - 9 |
| Density | 2.9 - 3.1 g/cm³ |
| Compressive Strength | ≥ 400 MPa |
| Water Absorption | < 0.2% |
| Working Temperature | -40°C to 350°C |
| Chemical Resistance | Excellent (Acids & Alkalis) |
| Abrasion Resistance | Excellent |
Installation method depends on flow velocity, ash concentration, channel geometry, and operating temperature conditions.
| Performance | Ash Sluicing Panel | Concrete Channel | Steel Lined Channel |
|---|---|---|---|
| Wear Resistance | Excellent | Poor | Medium |
| Corrosion Resistance | Excellent | Poor | Medium |
| Service Life | Very Long | Short | Medium |
| Maintenance Cost | Low | High | Medium |
| Installation Flexibility | High | Low | Medium |
12 Products
Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.
Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.
Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.
The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.
Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.
The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.
When you partner with Sunny Steel, you can stop worrying about meeting deadlines thanks to our responsive and timely service. You'll also say goodbye to unnecessary shopping around. Instead, you'll get white glove service from an expert who understands your needs and can get you the materials you need quickly.
