Abrasive Resistant Basalt Tiles
Highly abrasive-resistant basalt tiles for tough environments.
Cast basalt slabs are high-performance wear resistant materials produced from molten basalt, offering superior abrasion, impact and corrosion resistance in severe industrial environments.
Cast basalt slabs are dense, microcrystalline plates formed from molten basalt. After high-temperature melting, the material is cast into slab shapes and undergoes controlled crystallization, resulting in a very hard and chemically stable structure.
Compared with traditional wear materials such as steel, rubber, or ceramic tiles, cast basalt slabs offer superior resistance to sliding abrasion, erosion, and chemical attack, especially in harsh industrial environments.
Extremely hard surface with excellent resistance to abrasive wear from solid particles.
Performs well in high-velocity slurry, ash, and mineral transport systems.
Resistant to acids, alkalis, and most industrial chemical environments.
Significantly extends equipment lifetime and reduces maintenance frequency.
| Property | Value |
|---|---|
| Hardness | Mohs 8 - 9 |
| Density | 2.9 - 3.1 g/cm³ |
| Compressive Strength | ≥ 400 MPa |
| Water Absorption | < 0.2% |
| Working Temperature | -40°C to 350°C |
| Acid Resistance | Excellent |
| Abrasion Resistance | Excellent |
Values are typical references and may vary depending on production process and slab dimensions.
Installation method depends on operating temperature, impact load, equipment shape, and maintenance requirements.
| Performance | Cast Basalt Slab | Steel Plate | Rubber Lining |
|---|---|---|---|
| Wear Resistance | Excellent | Medium | Good |
| Corrosion Resistance | Excellent | Poor | Good |
| Service Life | Very Long | Short | Medium |
| Maintenance Cost | Low | High | Medium |
12 Products
Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.
Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.
Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.
The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.
Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.
The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.
When you partner with Sunny Steel, you can stop worrying about meeting deadlines thanks to our responsive and timely service. You'll also say goodbye to unnecessary shopping around. Instead, you'll get white glove service from an expert who understands your needs and can get you the materials you need quickly.
