Q355NH steel plate under China GB/T 4171 standard, it is a kind of weathering steel.
Q355NH weathering steel plate is the high tensile strength weathering steel plate, it has 490-630 Mpa tensile strength. More information about Q355NH weathering steel technology, please see the following:
Q355NH steel plate comprehensive performance: Q355NH steel plate has good weldability and low temperature impact toughness, suitable for architecture, artifacts such as weather resistance of weldments.
Q355NHB steel is quality grade B of Q355NH weather-resistant steel sheet What is the difference between the element composition and tensile requirement of weather-resistant steel plate Q355NHB compared to A588 steel plate?
Q355NHB weathering steel plate characteristics: It has the characteristics of high-quality steel such as toughness, plastic extension, forming, welding and cutting, abrasion, high temperature and fatigue. Q355NHB steel plate is atmospheric corrosion-resistant steel plate, also known as weather-resistant steel plate. It is a low alloy steel series between general steel and stainless steel. Weather-resistant steel is made of ordinary carbon steel with a few corrosion-resistant elements such as copper and nickel. Toughness, plastic extension, forming, welding and cutting, abrasion, high temperature, fatigue resistance, etc.
| Element | Data |
| C(％) | Max 0.16 |
| Si(％) | Max 0.50 |
| Mn(％) | 0.90-1.50 |
| P(％) | 0.035 |
| S(％) | 0.035 |
| Cr(％) | 0.40-0.80 |
| V(%) | 0.02-0.10 |
| Cu(%) | 0.20-0.50 |
| Properties | Data |
| Yield Rp0.2 (MPa) |
745 (≥) |
| Tensile Rm (MPa) |
333 (≥) |
| Impact KV/Ku (J) |
11 |
| Elongation A (%) |
23 |
| Reduction in cross section on fracture Z (%) |
24 |
| As-Heat-Treated Condition | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Brinell hardness (HBW) | 242 |
Q355NH steel plate has the characteristics of high-quality steel for toughness, plastic elongation, forming, welding, abrasion, high temperature and fatigue resistance.
304 Stainless is a low carbon (0.08% max) version of basic 18-8 also known as 302.
Type 316 is more resistant to atmospheric and other mild environments than Type 304.
310S Stainless Steel has excellent resistance to oxidation under constant temperatures to 2000°F.
317L is a molybdenum bearing austenitic chromium nickel steel similar to type 316, except the alloy content in 317L is somewhat higher.
Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance.
Type 410 is a martensitic stainless steel which is magnetic, resists corrosion in mild environents and has fairly good ductility.
ASTM A213 ASME SA-213 TP347H Seamless Steel Tubes contains NB-Cr-Ni austenitic stainless steel.
Duplex 2205 (UNS S31803), or Avesta Sheffield 2205 is a ferritic-austenitic stainless steel.
Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum..
Material to UNS S32760 is described as a super duplex stainless steel with a microstructure of 50:50 austenite and ferrite.
ASTM A269 / A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASME SA 249 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes.
904L stainless steel consists of chromium, nickel, molybdenum and copper contents, these elements give type 904L...
06Cr19Ni10 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard.
Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.
Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.
Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.
The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.
Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.
The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.
