GB 8163 STEEL PIPE
GB 8163 STEEL PIPE - industrial steel pipe
GB 5310 20G high pressure seamless boiler tubes are specialized steel tubes designed for use in high-pressure and high-temperature environments, particularly in boilers and heat exchangers.
Discover GB 5310 20G high-pressure seamless boiler tubes. Engineered for extreme environments in boilers and heat exchangers.
GB 5310 20G high pressure seamless boiler tubes are a type of seamless steel tubes or pipes designed and manufactured according to the Chinese national standard GB/T 5310-2017. As stated in [2], 20G is a commonly used material for making boiler tubes as it has excellent high-temperature mechanical properties and corrosion resistance.
These seamless steel tubes are typically used in high-pressure boilers with working pressure above 9.8 MPa and working temperature between 450℃ and 650℃. They are used for making superheaters, reheaters, economizers, and other high-pressure components in power plant boilers.
GB 5310 20G high-pressure seamless boiler tubes must meet strict standards for production and use, ensuring their safety and reliability in high-pressure applications. They come in various lengths, outer diameters, wall thicknesses, and end types such as plain end, beveled end, or threaded ends.
GB 5310 20G high pressure seamless boiler tubes possess several characteristics that make them indispensable in power generation applications:
High Temperature Resistance: These tubes are engineered to withstand elevated temperatures, ensuring stable and efficient heat transfer within boilers.
Seamless Design: The seamless manufacturing process eliminates the risk of weak points or leaks, contributing to enhanced safety and performance.
Excellent Heat Transfer: The composition and properties of 20G steel facilitate efficient heat exchange, maximizing energy conversion within boilers.
Corrosion Resistance: The steel's composition provides inherent resistance to corrosion, prolonging the lifespan of the tubes in harsh boiler environments.
Efficiency: GB 5310 20G tubes' superior heat transfer characteristics contribute to efficient energy conversion within boilers, optimizing power generation.
Reliability: The seamless design and high tensile strength of 20G steel ensure reliable and safe operation under demanding conditions.
Longevity: The inherent corrosion resistance of 20G steel extends the lifespan of the tubes, reducing maintenance and replacement frequency.
In the realm of power generation, where every element contributes to overall efficiency and reliability, GB 5310 20G high pressure seamless boiler tubes stand out as a critical component. With their ability to withstand high temperatures, excellent heat transfer properties, and inherent corrosion resistance, these tubes ensure efficient energy conversion and reliable steam generation in high-pressure boilers. By understanding their characteristics and applications, power plants can harness the benefits of GB 5310 20G tubes to enhance their operations and contribute to a sustainable energy future.
The versatile nature of 20G seamless steel pipes makes them suitable for a range of industrial applications:
Boilers: In the power generation sector, 20G pipes are used as superheater tubes, reheater tubes, and waterwall tubes in boilers, facilitating the exchange of heat and steam generation.
Heat Exchangers: These pipes play a crucial role in heat exchangers, where they enable efficient transfer of thermal energy between fluids in different industrial processes.
Petroleum Industry: The pipes find application in petroleum refineries for transporting high-temperature and high-pressure fluids.
When incorporating 20G seamless steel pipes into industrial systems, the following factors should be considered:
Operating Conditions: Ensure that the pipes are suitable for the specific temperature, pressure, and fluid characteristics of the application.
Compatibility: Verify compatibility with other components and materials within the system to prevent potential issues.
20G is a type of high-quality carbon structural steel, commonly used in the production of boiler tubes and pressure vessels due to its excellent mechanical properties and heat resistance.
20G is the steel material of GB 5310- 2008. GB 5310- 2008 standard is applicable to seamless tubes for making steam boiler whose pressure is high or higher and seamless tubes used as pipelines.
GB 5310 is a Chinese standard that outlines the specifications for seamless steel tubes used in high-pressure boilers. The designation "20G" refers to the material grade of these tubes, indicating that they are made from 20G steel, a low-carbon steel known for its excellent heat transfer properties and high tensile strength.
20G High Pressure Boiler Pipe, GB5310 20G boiler steel pipe, 20G boiler steel pipe, 20G boiler pipe
| Chemical elements | Data |
|---|---|
| Carbon | 0.17-0.23 |
| Silicon | 0.17-0.37 |
| Manganese | 0.35-0.65 |
| Phosphorus(max) | 0.03 |
| Sulfur(max) | 0.03 |
| Chromium(max) | 0.25 |
| Molybdenum(max) | 0.15 |
| Cuprum(max) | 0.2 |
| Nickel(max) | 0.25 |
| Vanadium(max) | 0.08 |
| Properties | Data |
|---|---|
| Yield Strength (Mpa) | 410-550 |
| Tensile Strength (Mpa) | 245 |
| Elongation (%) | 22 |
| W.T.(S) | Tolerance of W.T. | |
|---|---|---|
| <3.5 | +15%(+0.48mm min) | |
| -10%(+0.32mm min) | ||
| 3.5-20 | +15%,-10% | |
| >20 | D<219 | ±10% |
| D≥219 | +12.5%,-10% | |
| Column 1 | Column 2 | Column 3 | Column 4 |
|---|---|---|---|
| 83*13 | 127*10 | 168*20 | 245*27 |
| 83*14 | 127*17 | 168*32 | 245*32 |
| 89*16 | 133*16 | 180*21 | 273*27 |
| 95*9.2 | 133*16 | 180*22 | 273*30 |
| 95*10 | 133*22 | 180*25 | 273*36 |
| 95*15 | 140*18 | 180*40 | 299*30 |
| 102*14 | 146*14 | 194*21 | 325*30 |
| 114*9.2 | 152*17 | 203*26 | 377*35 |
| 114*10 | 159*16 | 219*22 | |
| 114*19 | 159*21 | 219*25 |
The 20G seamless steel pipe is mainly used for general boiler purposes, and can also be used for furnace tubes, heat exchanger tubes and seamless tubes for pipelines in petroleum refineries. As a professional boiler steel pipe supplier and manufacturer, besides the chemical composition and various mechanical properties, the 20G steel pipe we supply can also guarantee the water pressure, flattening, flaming tests as well as the surface quality and non-destructive inspection.
Annealed, Normalized, Normalized and Tempered
The steel tubes shall be delivered in a heat treated condition.
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting
5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; and so on.
Max length: 16000mm, also U bending can be offered.
This inventory is part of the inventory, demand and other models in stock or order materials, please contact us.
GB 5310 is a standard for seamless tubes used in high-pressure steam boilers and pipelines. The main application for GB 5310 tubes is as high-pressure pipeline tubes in boiler projects. These tubes can be used for superheaters, reheaters, and windpipes.
The GB 5310 standard applies to tubes made from materials such as:
The long-term use temperature for GB 5310 20G seamless steel pipes used as headers and steam pipes is ≤ 425 ° C.
| Steel Grade | C | Si | Mn | S | P | Cr | Mo | V | Ti | B | W | Ni | Al | Nb | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20G | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | 0.015 | 0.025 | ||||||||||
| 20 MnG | 0.17-0.24 | 0.17-0.37 | 0.70-1.00 | 0.015 | 0.025 | ||||||||||
| 25MnG | 0.22-0.27 | 0.17-0.37 | 0.70-1.00 | 0.015 | 0.025 | ||||||||||
| 15MoG | 0.12-0.20 | 0.17-0.37 | 0.40-0.80 | 0.015 | 0.025 | 0.25-0.35 | |||||||||
| 20MnG | 0.15-0.25 | 0.17-0.37 | 0.40-0.80 | 0.015 | 0.025 | 0.44-0.65 | |||||||||
| 12CrMoG | 0.08-0.15 | 0.17-0.37 | 0.40-0.70 | 0.015 | 0.025 | 0.40-0.70 | 0.40-0.55 | ||||||||
| 15CrMoG | 0.12-0.18 | 0.17-0.37 | 0.40-0.70 | 0.015 | 0.025 | 0.80-1.10 | 0.40-0.55 | ||||||||
| 12Cr2MoG | 0.08-0.15 | ≤0.60 | 0.40-0.60 | 0.015 | 0.025 | 2.00-2.50 | 0.90-1.13 | ||||||||
| 12Cr1MoVG | 0.08-0.15 | 0.17-0.37 | 0.40-0.70 | 0.010 | 0.025 | 0.90-1.20 | 0.25-0.35 | 0.15-0.30 | |||||||
| 12Cr2MoWVTiB | 0.08-0.15 | 0.45-0.75 | 0.45-0.65 | 0.015 | 0.025 | 1.60-2.10 | 0.50-0.65 | 0.28-0.42 | 0.08-0.18 | 0.002-0.008 | 0.30-0.55 | ||||
| 10Cr9Mo1VNbN | 0.08-0.12 | 0.20-0.50 | 0.30-0.60 | 0.010 | 0.020 | 8.00-9.50 | 0.85-1.05 | 0.18-0.25 | ≤0.040 | ≤0.040 | 0.06-0.10 | 0.03-0.07 |
Steel smelting method
High-quality carbon structural steel and alloy structural steel shall be smelted by electric furnace plus furnace refining, oxygen converter plus furnace refining or electroslag remelting method, and steel refined outside the furnace shall be subjected to vacuum degassing treatment.
10Cr9Mo1VNbN, 10Cr9MoW2VNbBN, 10Cr11MoW2VNbCu1BN, 11Cr9Mo1W1VNbBN and stainless (heat-resistant) steel should be smelted by electric furnace plus furnace refining or electroslag remelting. The steel refined outside the furnace should be vacuum degassed.
After consultation between the supplier and the buyer, and indicating in the contract, other higher-required smelting methods may be adopted. When the purchaser specifies a certain smelting method, it should be indicated in the contract.
The tube blank can be produced by continuous casting, die casting or hot rolling (forging).
Continuous casting tube blanks shall comply with the provisions of YB/T 4149, in which the level of low-fold structural defects shall not exceed 1; the hot-rolled (forged) tube blanks shall comply with the provisions of YB/T ××××; It is carried out in accordance with the regulations for hot-rolled (forged) tube blanks.
Steel pipes shall be manufactured by hot rolling (extrusion, expansion) or cold drawing (rolling). Steel pipes of grade 08Cr18Ni11NbFG shall be manufactured by cold drawing (rolling) seamless method.
The steel pipe shall be delivered in a heat treated condition. The heat treatment system for steel pipes shall comply with the requirements of Table 4. The heat treatment system for steel pipes should be filled in the quality certificate.
| No. | Steel Pipe | Heat treatment |
|---|---|---|
| 1 | 12Ga、20Ga | 880 ℃～940 ℃,Normalizing |
| 2 | 20MnGa、25MnGa | 880 ℃～940 ℃,Normalizing |
| 3 | 15MoGa、20MoGa | 890 ℃～950 ℃,Normalizing |
| 4 | 12CrMoGa | 900 ℃～960 ℃,Normalizing；650 ℃～730 ℃,Tempering |
| 5 | 15CrMoGa | 900 ℃～960 ℃,Normalizing；660 ℃～730 ℃,Tempering |
| 6 | 12Cr2MoGa | 900 ℃～960 ℃,Normalizing；700 ℃～750 ℃,Tempering It can also be heated to 900 °C ~ 960 °C, and the furnace is cooled to 700 °C for more than 1 h, and air-cooled. |
| 7 | 12Cr1MoVGa | 980 ℃～1 020 ℃,Normalizing，980 °C ~ 1 020 °C normalizing, when the wall thickness is greater than 30 mm, forced cooling; 720 °C ~ 760 °C tempering. |
| 8 | 12Cr2MoWVTiB | 1 000 ℃～1 035 ℃,Normalizing；760 ℃～790 ℃,Tempering |
| 9 | 07Cr2MoW2VNbB | ≥1 040 ℃,Normalizing，≥730 ℃,Tempering |
| 10 | 08Cr2Mo1W2VTiB | ≥980 ℃,Normalizing，≥730 ℃,Tempering |
| 11 | 12Cr3MoVSiTiB | 1 040 ℃～1 060 ℃,Normalizing；720 ℃～770 ℃,Tempering |
| 12 | 09Ni1MnMoNbCu | 880 ℃～980 ℃,Normalizing，580 ℃～680 ℃,Tempering |
| 13 | 10Cr9Mo1VNbN | ≥1 040 ℃,Normalizing，≥730 ℃,Tempering |
| 14 | 10Cr9MoW2VNbBN | ≥1 040 ℃,Normalizing，≥730 ℃,Tempering |
| 15 | 10Cr11MoW2VNbCu1BN | ≥1 040 ℃,Normalizing，≥730 ℃,Tempering |
| 16 | 11Cr9Mo1W1VNbBN | 1 040 ℃～1 080 ℃,Normalizing，740 ℃～780 ℃,Tempering |
| 17 | 15Cr18Ni9b | Solution treatment: solution temperature ≥1 040 °C. |
| 18 | 10Cr18Ni9NbCu3BNb | Solution treatment: solution temperature ≥ 1 100 °C. |
| 19 | 07Cr25Ni21NbNcd | Separate solution treatment: solution temperature ≥ 1 100 °C. |
| 20 | 08Cr18Ni11Nbbd | Solution treatment: solution temperature ≥1 040 °C. |
| 21 | 07Cr18Ni11Nbcd | Separate solution treatment: hot rolling (extrusion, expansion) steel tube solid solution temperature ≥ 1 050 °C, cold drawn (rolled) steel tube solid solution temperature ≥ 1100 °C. |
| 22 | 08Cr18Ni10NbFG | Softening heat treatment before cold working: softening heat treatment temperature should be at least 50 °C higher than solution heat treatment temperature; solution treatment after final cold working: solution temperature ≥1 180 °C |
| a. The finishing temperature of the hot-rolled steel pipe is at the critical temperature of the phase transition Ar3 to the upper limit of the temperature specified in the table, and when the steel pipe is air-cooled, the steel pipe is considered to be normalized. b. The finishing temperature of the hot-rolled steel pipe meets the solid solution temperature specified in the table. As an alternative to the solid solution treatment method, the steel pipe can be separately quenched by water or cooled by other fast enough methods. c, the solution treatment should be a separate heat treatment, and the heat treatment in the process is not allowed to replace the separate solution treatment. d. According to the requirements of the purchaser, the steel pipes of the grades 07Cr25Ni21NbN, 08Cr19Ni10Nb and 07Cr18Ni11Nb may be subjected to a stabilization heat treatment lower than the initial solution treatment temperature after the solution treatment, and the temperature of the stabilization heat treatment is negotiated between the supplier and the purchaser. |
||
| Grade | Tensile strength (Mpa) |
Yield point(Mpa) not less than |
Elongation(%) not less than |
Impact(J) not less than |
|---|---|---|---|---|
| 20G | 410-550 | 245 | 24/22 | 40/27 |
| 25MnG | 485-640 | 275 | 20/18 | 40/27 |
| 15MoG | 450-600 | 270 | 22/20 | 40/27 |
| 20MnG | 415-665 | 220 | 22/20 | 40/27 |
| 12CrMoG | 410-560 | 205 | 21/19 | 40/27 |
| 12Cr2MoG | 450-600 | 280 | 22/20 | 40/27 |
| 12Cr1MoVG | 470-640 | 255 | 21/19 | 40/27 |
| 12Cr2MoWVTiB | 540-735 | 345 | 18 | 40/27 |
| 10Cr9Mo1VNb | ≥585 | 415 | 20 | 40 |
| 1Cr18Ni9 | ≥520 | 206 | 35 | |
| 1Cr19Ni11Nb | ≥520 | 206 | 35 |
GB seamless steel pipes are widely produced in China, available in various sizes, grades and surface finishes to meet specific project requirements.
According to industry statistics, there are more than 240 national standard steel pipe manufacturers and 250 seamless steel pipe production lines in China.
| Grade | C | Si | Mn | Cr | Ni | Mo | P ≤ | S ≤ | Ti | Cu ≤ |
|---|---|---|---|---|---|---|---|---|---|---|
| Q195 | 0.06–0.12 | ≤0.30 | 0.25–0.50 | ≤0.3 | ≤0.3 | – | 0.045 | 0.050 | – | 0.30 |
| Q235 | 0.14–0.22 | ≤0.30 | 0.30–0.65 | ≤0.3 | ≤0.3 | – | 0.045 | 0.050 | – | 0.30 |
| Q345B | ≤0.20 | ≤0.55 | 1.00–1.60 | – | – | – | 0.040 | 0.040 | – | – |
| 10# | 0.07–0.13 | 0.07–0.37 | 0.35–0.65 | ≤0.15 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| 20# | 0.17–0.23 | 0.07–0.37 | 0.35–0.65 | ≤0.25 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| 35# | 0.32–0.39 | 0.07–0.37 | 0.50–0.80 | ≤0.25 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| 45# | 0.42–0.50 | 0.07–0.37 | 0.50–0.80 | ≤0.25 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| 20Cr | 0.18–0.24 | 0.07–0.37 | 0.50–0.80 | 0.70–1.00 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 40Cr | 0.37–0.44 | 0.07–0.37 | 0.50–0.80 | 0.80–1.10 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 20CrMo | 0.17–0.24 | 0.07–0.37 | 0.40–0.70 | 0.80–1.10 | ≤0.3 | 0.15–0.25 | 0.035 | 0.035 | – | 0.30 |
| 35CrMo | 0.32–0.40 | 0.07–0.37 | 0.40–0.70 | 0.80–1.10 | ≤0.3 | 0.15–0.25 | 0.035 | 0.035 | – | 0.30 |
| 42CrMo | 0.38–0.45 | 0.07–0.37 | 0.50–0.80 | 0.90–1.20 | 1.00–1.40 | 0.15–0.25 | 0.035 | 0.035 | – | 0.30 |
| 20CrMoTi | 0.17–0.23 | 0.07–0.37 | 0.40–0.70 | 0.45–0.75 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 35Mn2 | 0.32–0.39 | 0.07–0.37 | 1.40–1.80 | ≤0.3 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 40Mn2 | 0.37–0.44 | 0.07–0.37 | 1.40–1.80 | ≤0.3 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 35SiMn | 0.32–0.40 | 1.10–1.40 | 1.10–1.40 | ≤0.3 | ≤0.3 | – | 0.035 | 0.035 | – | 0.30 |
| 15Mn | 0.12–0.16 | 0.07–0.37 | 0.70–1.00 | ≤0.25 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| 20Mn | 0.17–0.23 | 0.07–0.37 | 0.70–1.00 | ≤0.25 | ≤0.3 | – | 0.035 | 0.035 | – | 0.25 |
| Class | Tolerance |
|---|---|
| D1 | ±1.5%，min ±0.75 mm |
| D2 | ±1.0%，min ±0.50 mm |
| D3 | ±0.75%，min ±0.30 mm |
| D4 | ±0.50%，min ±0.10 mm |
With years of expertise, we provide a wide range of steel tube processing services. From basic sawing and machining to complex bending and upsetting operations, we support you at every stage of your project.
Our capabilities include eccentricity reduction and concentricity improvement through turning and grinding. We specialize in creating complex geometries using rotary swaging and axial forming, and offer property modifications through partial heat treatment to meet your exact requirements.
A range to meet your needs
High-quality steel solutions for diverse mechanical engineering applications – reliable, precise, and built for performance.
Premium steel products for demanding construction projects – from bridges to offshore structures, built to last.
Versatile components for the automotive industry – precision, quality, and processing expertise for every application.
Robust tubes for plant engineering and energy systems – designed for extreme conditions and long-term efficiency.
Versatile solutions for modern infrastructure – supporting reliable supply networks and large-scale construction projects.
Versatile solutions for hydraulic systems – durable, pressure-resistant, and engineered for maximum reliability.
| Condition | Typical Application |
|---|---|
| High Temperature | Boilers, superheaters, steam headers |
| Low Temperature | Cryogenic processing systems |
| High Pressure | Power & process piping |
| Corrosive Media | Chemical & petrochemical plants |
| Creep Service | Thermal power stations |
| Product | Specification |
|---|---|
| Seamless Pipes | ASTM A335 P1 / P5 / P9 / P11 / P22 / P91 |
| Butt Weld Fittings | ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91 |
| Forged Fittings & Flanges | ASTM A182 F1 / F5 / F9 / F11 / F22 / F91 |
Sunny Steel supplies alloy steel piping systems worldwide, supporting projects that demand certified materials, full traceability and long-term operational reliability.
Chemical composition inspection, mechanical properties test(tensile strength,yield strength, elongation, flaring, flattening, bending, hardness, impact test), surface and dimension test, non-destructive test, hydrostatic test.
Identification of the chemical composition of the metal used to manufacture the fitting. Uses PMI sensors, including X-ray fluorescence or optical emission spectrometry.
Steel pipe delivery status(condition): cold / hard (BK), cold / soft (BKW), after cold stress relief annealing (BKS), annealing (GBK), normalized (NBK).
| Term | Symbol | Explanation |
|---|---|---|
| Cold-finished/hard (cold-finished as-drawn) | BK | No heat treatment after the last cold-forming process. The tubes therefore have only low deformability. |
| Cold-finished/soft (lightly cold-worked) | BKW | After the last heat treatment there is a light finishing pass (cold drawing). With proper subsequent processing, the tube can be cold-formed (e.g. bent, expanded) within certain limits. |
| Annealed | GBK | After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum. |
| Normalized | NBK | The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum. |
The general cold strip mills, volume should go through continuous annealing (CAPL unit) to eliminate cold hardening and rolling stress, or batch annealing reach the mechanical properties of the corresponding standard specifies. Cold rolled steel surface quality, appearance, dimensional accuracy better than hot-rolled plate, and right-rolled thin product thickness is about 0.18mm, so the majority of users favor.
Cold rolled steel coil substrate products deep processing of high value-added products. Such as electro-galvanized, hot dip galvanized, electro-galvanized fingerprint resistant, painted steel roll damping composite steel, PVC laminating steel plates, etc., so that the excellent quality of these products has a beautiful, high resistance to corrosion, has been widely used.
Cold rolled steel coil finishing after annealing, cut the head, tail, trimming, flattening, smooth, heavy volume, or longitudinal clipboard. Cold-rolled products are widely used in automobile manufacturing, household electrical appliances, instruments, switches, buildings, office furniture and other industries. Steel plate strapping package weight of 3 to 5 tons. Flat sub-volume typically 3 to 10 tons / volume. Coil diameter 6m.
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for seaworthy delivery or as requested.
There are probably hundreds of different methods for packing a pipe, and most of them have merit, but there are two principles that are vital for any method to work: prevent rusting and sea transportation security.
Our packing can meet any needs of the customers.
Commonly used alloying elements and their effects are listed in the table given below.
| Alloying Elements | Effect on the Properties |
|---|---|
| Chromium | Increases Resistance to corrosion and oxidation. Increases hardenability and wear resistance. Increases high temperature strength. |
| Nickel | Increases hardenability. Improves toughness. Increases impact strength at low temperatures. |
| Molybdenum | Increases hardenability, high temperature hardness, and wear resistance. Enhances the effects of other alloying elements. Eliminate temper brittleness in steels. Increases high temperature strength. |
| Manganese | Increases hardenability. Combines with sulfur to reduce its adverse effects. |
| Vanadium | Increases hardenability, high temperature hardness, and wear resistance. Improves fatigue resistance. |
| Titanium | Strongest carbide former. Added to stainless steel to prevent precipitation of chromium carbide. |
| Silicon | Removes oxygen in steel making. Improves toughness. Increases hardness ability |
| Boron | Increases hardenability. Produces fine grain size. |
| Aluminum | Forms nitride in nitriding steels. Produces fine grain size in casting. Removes oxygen in steel melting. |
| Cobalt | Increases heat and wear resistance. |
| Tungsten | Increases hardness at elevated temperatures. Refines grain size. |
Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique.
Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.
Ceramic tile lined pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe.
The material of the rare earth alloy wear-resistant pipe is ZG40CrMnMoNiSiRe, which is also the grade of rare earth alloy steel.
Tubes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.
The ASTM A213 T91 seamless tubes are primarily used for boiler, superheater, and heat-exchanger.
When you partner with Sunny Steel, you can stop worrying about meeting deadlines thanks to our responsive and timely service. You'll also say goodbye to unnecessary shopping around. Instead, you'll get white glove service from an expert who understands your needs and can get you the materials you need quickly.
